High definition Ferrovanadium 80 - Ferro Vanadium – HSG Metal
High definition Ferrovanadium 80 - Ferro Vanadium – HSG Metal Detail:
Specification of Ferrovanadium
|
Brand |
Chemical Compositions (%) |
||||||
|
V |
C |
Si |
P |
S |
Al |
Mn |
|
|
≤ |
|||||||
|
FeV40-A |
38.0~45.0 |
0.60 |
2.0 |
0.08 |
0.06 |
1.5 |
— |
|
FeV40-B |
38.0~45.0 |
0.80 |
3.0 |
0.15 |
0.10 |
2.0 |
— |
|
FeV50-A |
48.0~55.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV50-B |
48.0~55.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV60-A |
58.0~65.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV60-B |
58.0~65.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV80-A |
78.0~82.0 |
0.15 |
1.5 |
0.05 |
0.04 |
1.5 |
0.50 |
|
FeV80-B |
78.0~82.0 |
0.20 |
1.5 |
0.06 |
0.05 |
2.0 |
0.50 |
|
Size |
10-50mm |
||||||
Products Description
Ferrovanadium is an iron alloy obtained by reducing vanadium pentoxide in an electric furnace with carbon, and can also be obtained by reduction of vanadium pentoxide by electric furnace silicon thermal method.
It is widely used as an elemental additive for smelting vanadium-containing alloy steels and alloy cast irons, and has been used in recent years to make permanent magnets.
Ferrovanadium is mainly used as an alloying additive for steel making.
After adding vanadium iron to steel, the hardness, strength, wear resistance and ductility of the steel can be significantly improved, and the cutting performance of the steel can be improved.
Application of ferrovanadium
1. It Is an important alloy additive in iron and steel industry. It can improve the strength, toughness, ductility and heat resistance of steel. Since the 1960s, the application of ferrovanadium in the iron and steel industry has increased dramatically, to 1988 accounted for 85% of the consumption of ferro vanadium. The proportion of iron vanadium consumption in steel is carbon steel 20%, high strength low alloy steel 25%, alloy steel 20%, tool steel 15%. High strength low alloy steel (HSLA) containing vanadium iron is widely used in the production and construction of oil/gas pipelines, buildings, Bridges, rails, pressure vessels, carriage frames and so on due to its high strength.
2. In the non-ferrous alloy is mainly used to produce vanadium ferrotitanium alloy, such as Ti-6Al-4V, Ti-6Al-6V-2Sn and
Ti-8Al-1V-Mo. Ti-6al-4v alloy is used in the manufacture of aircraft and rockets excellent high temperature structural materials, in the United States is very important, the output of titanium vanadium ferroalloy accounted for more than half. Ferro vanadium metal can also be used in magnetic materials, cast iron, carbide, superconducting materials and nuclear reactor materials and other fields.
3. Is mainly used as an alloy additive in steelmaking. The hardness, strength, wear resistance and ductility of steel
can be significantly improved by adding ferrovanadium into steel, and the cutting performance of steel can be improved. Vanadium iron is commonly used in the production of carbon steel, low alloy steel strength steel, high alloy steel, tool steel and cast iron.
4. Suitable for alloy steel smelting, alloy element additive and stainless steel electrode coating, etc. This standard applies to the production of niobium pentoxide concentrate as raw material for steel making or casting additives, electrode as alloy agent, magnetic materials and other uses of iron vanadium.
Product detail pictures:
Related Product Guide:
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for High definition Ferrovanadium 80 - Ferro Vanadium – HSG Metal , The product will supply to all over the world, such as: Lisbon, Bangalore, Macedonia, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Alva from Lithuania - 2018.12.30 10:21
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Olga from San Francisco - 2018.06.05 13:10
Related products
-
China Cheap price Buy Chromium Metal - GOOD QU...
Metal Chromium Lump / Cr Lmup Grade Chemical Composition % Cr Fe Si Al Cu C S P ≧ ≦ HRCR99-A 99 0.30 0.25 0.30 0.01 0.01 0.01 0.01 HRCR99-B 99 0.40 0.30 0.30 0.00 0.02 0.02 0.01 HRCR98.5-A 98.5 0.45 0.35 0.50 0.04 0.03 0.02 0.01 HRCR98.5-B 98.5 0.50 0.40 0.50 0.06 0.03 0.02 0.01 HRCR98 98 0.80 0.40 0.80 0.02 0.05 0.03 0.01 Description Metal chromi...
-
Molybdenum Scrap Price - 0.18mm EDM Molybdenum...
Molybdenum wire advantage 1. Molybdenum wire high pricision,line diameter tolerance control at less than 0 to 0.002mm 2. The ratio of breaking wire low,processing rate is high,good performance and good price. 3. Can finish the stable long time continuous processing. Products Description Edm molybdenum Moly wire 0.18mm 0.25mm Molybdenum wire(spray moly wire)is mainly used for auto parts spraying,such as piston ring,synchronizer rings,shift elements,etc.Molybdenum spray wire is also used in rep...
-
Vanadium One Iron - Ferro Vanadium – HSG...
Specification of Ferrovanadium Brand Chemical Compositions (%) V C Si P S Al Mn ≤ FeV40-A 38.0~45.0 0.60 2.0 0.08 0.06 1.5 — FeV40-B 38.0~45.0 0.80 3.0 0.15 0.10 2.0 — FeV50-A 48.0~55.0 0.40 2.0 0.06 0.04 1.5 — FeV50-B 48.0~55.0 0.60 2.5 0.10 0.05 2.0 — FeV60-A 58.0~65.0 0.40 2.0 0.06 0.04 1.5 — FeV60-B 58.0~65.0 0.60 2.5 0.10 0.05 2...
-
Excellent quality Wolfram Scrap - High Pure 99...
Product parameters Product name Titanium target for pvd coating machine Grade Titanium (Gr1, Gr2, Gr5, Gr7,GR12) Alloy target: Ti-Al, Ti-Cr, Ti-Zr etc Origin Baoji city Shaanxi Province china Titanium content ≥99.5 (%) Impurity content <0.02 (%) Density 4.51 or 4.50 g/cm3 Standard ASTM B381; ASTM F67, ASTM F136 Size 1. Round target: Ø30–2000mm, thickness 3.0mm–300mm; 2. Plate Targe: Length: 200-500mm Width:100-230mm Thickness:3–40mm; 3. Tube target: Dia...
-
High Quality for Steel Making Tungsten Bar - C...
Product Parameters Material tungsten Color sintered, sandblasting or polishing Purity 99.95% Tungsten Grade W1,W2,WAL,WLa,WNiFe Product Feature High melting point, High- density, high temperature oxidation resistance, long service life, resistance to corrosion. Property high hardness and strength, excellent corrosion resistance Desity 19.3/cm3 Dimension Customized Standard ASTM B760 Melting point 3410℃ Design&Size OEM or ODM acceptable Chemical Compositio...
-
High Quality for Steel Making Tungsten Bar - O...
Product Parameters Brand HSG Standard ASTMB760-07;GB/T3875-83 Grade W1,W2,WAL1,WAL2 Density 19.2g/cc Purity ≥99.95% Size Thick0.05mm min*Width300mm max*L1000mm max Surface Black/Alkali cleaning/ polished Melting point 3260C Process hot rolling chemical composition Chemical composition Impurity content ( % ), ≤ Al Ca Fe Mg Mo Ni Si C N O Balance 0.002 0.005 0.005 0.003 0.01 0.003 0.005 0.008 0.003 0.005 Dimension and permissible variations ...