Ferro Vanadium Prijs - Ferro Vanadium – HSG Metal
Ferro Vanadium Prijs - Ferro Vanadium – HSG Metal Detail:
Specification of Ferrovanadium
|
Brand |
Chemical Compositions (%) |
||||||
|
V |
C |
Si |
P |
S |
Al |
Mn |
|
|
≤ |
|||||||
|
FeV40-A |
38.0~45.0 |
0.60 |
2.0 |
0.08 |
0.06 |
1.5 |
— |
|
FeV40-B |
38.0~45.0 |
0.80 |
3.0 |
0.15 |
0.10 |
2.0 |
— |
|
FeV50-A |
48.0~55.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV50-B |
48.0~55.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV60-A |
58.0~65.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV60-B |
58.0~65.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV80-A |
78.0~82.0 |
0.15 |
1.5 |
0.05 |
0.04 |
1.5 |
0.50 |
|
FeV80-B |
78.0~82.0 |
0.20 |
1.5 |
0.06 |
0.05 |
2.0 |
0.50 |
|
Size |
10-50mm |
||||||
Products Description
Ferrovanadium is an iron alloy obtained by reducing vanadium pentoxide in an electric furnace with carbon, and can also be obtained by reduction of vanadium pentoxide by electric furnace silicon thermal method.
It is widely used as an elemental additive for smelting vanadium-containing alloy steels and alloy cast irons, and has been used in recent years to make permanent magnets.
Ferrovanadium is mainly used as an alloying additive for steel making.
After adding vanadium iron to steel, the hardness, strength, wear resistance and ductility of the steel can be significantly improved, and the cutting performance of the steel can be improved.
Application of ferrovanadium
1. It Is an important alloy additive in iron and steel industry. It can improve the strength, toughness, ductility and heat resistance of steel. Since the 1960s, the application of ferrovanadium in the iron and steel industry has increased dramatically, to 1988 accounted for 85% of the consumption of ferro vanadium. The proportion of iron vanadium consumption in steel is carbon steel 20%, high strength low alloy steel 25%, alloy steel 20%, tool steel 15%. High strength low alloy steel (HSLA) containing vanadium iron is widely used in the production and construction of oil/gas pipelines, buildings, Bridges, rails, pressure vessels, carriage frames and so on due to its high strength.
2. In the non-ferrous alloy is mainly used to produce vanadium ferrotitanium alloy, such as Ti-6Al-4V, Ti-6Al-6V-2Sn and
Ti-8Al-1V-Mo. Ti-6al-4v alloy is used in the manufacture of aircraft and rockets excellent high temperature structural materials, in the United States is very important, the output of titanium vanadium ferroalloy accounted for more than half. Ferro vanadium metal can also be used in magnetic materials, cast iron, carbide, superconducting materials and nuclear reactor materials and other fields.
3. Is mainly used as an alloy additive in steelmaking. The hardness, strength, wear resistance and ductility of steel
can be significantly improved by adding ferrovanadium into steel, and the cutting performance of steel can be improved. Vanadium iron is commonly used in the production of carbon steel, low alloy steel strength steel, high alloy steel, tool steel and cast iron.
4. Suitable for alloy steel smelting, alloy element additive and stainless steel electrode coating, etc. This standard applies to the production of niobium pentoxide concentrate as raw material for steel making or casting additives, electrode as alloy agent, magnetic materials and other uses of iron vanadium.
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Ferro Vanadium Prijs - Ferro Vanadium – HSG Metal , The product will supply to all over the world, such as: Bhutan, Japan, India, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, You should contact with us now!
By Josephine from British - 2018.05.22 12:13
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By April from Russia - 2017.11.29 11:09
Related products
-
Ferro Niobium - High Purity And High Temperatu...
Dimension 15-20 mm x 15-20 mm x 400-500 mm We can also chip or crush the bar to smaller size based on your request Impurity content Fe Si Ni W Mo Ti 0.004 0.004 0.002 0.005 0.005 0.002 Ta O C H N 0.05 0.012 0.0035 0.0012 0.003 Products Description Niobium bar is sintered from Nb2O5 powders, a semi-finished product which is taken for melting niobium ingot, or as an alloy additive for steel or superalloy production. Our niobium bar are c...
-
Good Quality Ferrotungsten - High Density Cust...
Product Parameters Tungsten Block Polished 1kg Tungsten Cube 38.1mm Purity W≥99.95% Standard ASTM B760, GB-T 3875, ASTM B777 Surface Ground Surface, Machined surface Density 18.5 g/cm3 –19.2 g/cm3 Dimensions Common sizes：12.7*12.7*12.7mm20*20*20mm 25.4*25.4*25.4mm 38.1*38.1*38.1mm Application Ornament, decoration, Balance weight, desktop, gift, target, Military industry, and so on The characteristics 1. Laser engraving tungsten cube for 1kg 2. Melting point ...
-
Iron Molybdenum - Molybdenum Price Customized ...
Product Parameters Term Molybdenum bar Grade Mo1,Mo2,TZM,Mla,etc Size as request Surface condition hot rolling, cleaning, polishedc MOQ 1 kilograms Test and Quality dimension inspection appearance quality test process performance test mechanical properities test Load port shanghai shenzhen qingdao Packing standard wooden case, carton or as request Payment L/C, D/A, D/P, T/T, Western union, MoneyGram, Paypal, Wire-transfer Delivery time 10-15 working days ...
-
Hot New Products Iron Molybdenum - 0.18mm EDM ...
Molybdenum wire advantage 1. Molybdenum wire high pricision,line diameter tolerance control at less than 0 to 0.002mm 2. The ratio of breaking wire low,processing rate is high,good performance and good price. 3. Can finish the stable long time continuous processing. Products Description Edm molybdenum Moly wire 0.18mm 0.25mm Molybdenum wire(spray moly wire)is mainly used for auto parts spraying,such as piston ring,synchronizer rings,shift elements,etc.Molybdenum spray wire is also used in rep...
-
Sintered Molybdenum Bar - High Pure 99.95% And...
Product Parameters Product Name Best price pure molybdenum tube with various specifications Material pure molybdenum or molybdenum alloy Size reference the below details Model Number Mo1 Mo2 Surface hot rolling, cleaning, polished Delivery time 10-15 working days MOQ 1 kilograms Used Aerospace industry, Chemical equipment industry The specification would be changed by the customers’ requirements. Regular size range Diameter (mm) Wall thickness (mm) Len...
-
Chinese Professional High Carbon Chromium Metal...
Metal Chromium Lump / Cr Lmup Grade Chemical Composition % Cr Fe Si Al Cu C S P ≧ ≦ HRCR99-A 99 0.30 0.25 0.30 0.01 0.01 0.01 0.01 HRCR99-B 99 0.40 0.30 0.30 0.00 0.02 0.02 0.01 HRCR98.5-A 98.5 0.45 0.35 0.50 0.04 0.03 0.02 0.01 HRCR98.5-B 98.5 0.50 0.40 0.50 0.06 0.03 0.02 0.01 HRCR98 98 0.80 0.40 0.80 0.02 0.05 0.03 0.01 Description Metal chromi...