Ferro Tungsten Alloy - Ferro Vanadium – HSG Metal
Ferro Tungsten Alloy - Ferro Vanadium – HSG Metal Detail:
Specification of Ferrovanadium
|
Brand |
Chemical Compositions (%) |
||||||
|
V |
C |
Si |
P |
S |
Al |
Mn |
|
|
≤ |
|||||||
|
FeV40-A |
38.0~45.0 |
0.60 |
2.0 |
0.08 |
0.06 |
1.5 |
— |
|
FeV40-B |
38.0~45.0 |
0.80 |
3.0 |
0.15 |
0.10 |
2.0 |
— |
|
FeV50-A |
48.0~55.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV50-B |
48.0~55.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV60-A |
58.0~65.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV60-B |
58.0~65.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV80-A |
78.0~82.0 |
0.15 |
1.5 |
0.05 |
0.04 |
1.5 |
0.50 |
|
FeV80-B |
78.0~82.0 |
0.20 |
1.5 |
0.06 |
0.05 |
2.0 |
0.50 |
|
Size |
10-50mm |
||||||
Products Description
Ferrovanadium is an iron alloy obtained by reducing vanadium pentoxide in an electric furnace with carbon, and can also be obtained by reduction of vanadium pentoxide by electric furnace silicon thermal method.
It is widely used as an elemental additive for smelting vanadium-containing alloy steels and alloy cast irons, and has been used in recent years to make permanent magnets.
Ferrovanadium is mainly used as an alloying additive for steel making.
After adding vanadium iron to steel, the hardness, strength, wear resistance and ductility of the steel can be significantly improved, and the cutting performance of the steel can be improved.
Application of ferrovanadium
1. It Is an important alloy additive in iron and steel industry. It can improve the strength, toughness, ductility and heat resistance of steel. Since the 1960s, the application of ferrovanadium in the iron and steel industry has increased dramatically, to 1988 accounted for 85% of the consumption of ferro vanadium. The proportion of iron vanadium consumption in steel is carbon steel 20%, high strength low alloy steel 25%, alloy steel 20%, tool steel 15%. High strength low alloy steel (HSLA) containing vanadium iron is widely used in the production and construction of oil/gas pipelines, buildings, Bridges, rails, pressure vessels, carriage frames and so on due to its high strength.
2. In the non-ferrous alloy is mainly used to produce vanadium ferrotitanium alloy, such as Ti-6Al-4V, Ti-6Al-6V-2Sn and
Ti-8Al-1V-Mo. Ti-6al-4v alloy is used in the manufacture of aircraft and rockets excellent high temperature structural materials, in the United States is very important, the output of titanium vanadium ferroalloy accounted for more than half. Ferro vanadium metal can also be used in magnetic materials, cast iron, carbide, superconducting materials and nuclear reactor materials and other fields.
3. Is mainly used as an alloy additive in steelmaking. The hardness, strength, wear resistance and ductility of steel
can be significantly improved by adding ferrovanadium into steel, and the cutting performance of steel can be improved. Vanadium iron is commonly used in the production of carbon steel, low alloy steel strength steel, high alloy steel, tool steel and cast iron.
4. Suitable for alloy steel smelting, alloy element additive and stainless steel electrode coating, etc. This standard applies to the production of niobium pentoxide concentrate as raw material for steel making or casting additives, electrode as alloy agent, magnetic materials and other uses of iron vanadium.
Product detail pictures:
Related Product Guide:
"Control the standard by the details, show the power by quality". Our business has strived to establish a highly efficient and stable team staff and explored an effective good quality regulate course of action for Ferro Tungsten Alloy - Ferro Vanadium – HSG Metal , The product will supply to all over the world, such as: Anguilla, Paraguay, Latvia, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By olivier musset from Slovakia - 2018.09.23 18:44
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Deirdre from Liverpool - 2018.06.18 17:25
Related products
-
Metallic Cobalt - Niobium Target – HSG M...
Product parameters Specification Item ASTM B393 9995 pure polished niobium target for industry Standard ASTM B393 Density 8.57g/cm3 Purity ≥99.95% Size according to customer’s drawings Inspection Chemical composition testing, Mechanical testing, Ultrasonic inspection, Appearance size detection Grade R04200, R04210, R04251, R04261 Surface polishing, grinding Technique sintered, rolled, forged Feature High temperature resistance, corrosion resistance Application S...
-
Ferro Niobium Lumps - High Purity And High Tem...
Dimension 15-20 mm x 15-20 mm x 400-500 mm We can also chip or crush the bar to smaller size based on your request Impurity content Fe Si Ni W Mo Ti 0.004 0.004 0.002 0.005 0.005 0.002 Ta O C H N 0.05 0.012 0.0035 0.0012 0.003 Products Description Niobium bar is sintered from Nb2O5 powders, a semi-finished product which is taken for melting niobium ingot, or as an alloy additive for steel or superalloy production. Our niobium bar are c...
-
Wholesale Purity Indium Ingot - high purity ro...
Product parameters Brand Name HSG Metal Model Number HSG-moly target Grade MO1 Melting point(℃) 2617 Processing Sintering/ Forged Shape Special Shape Parts Material Pure molybdenum Chemical Composition Mo:> =99.95% Certificate ISO9001:2015 Standard ASTM B386 Surface Bright and Ground Surface Density 10.28g/cm3 Color Metallic Luster Purity Mo:> =99.95% Application PVD coating film in glass industry , ion plating Advantage High Temperature Resistance, Hig...
-
Ferro Molybdeen 60 - HSG Ferro Tungsten price ...
We supply Ferro Tungsten of all grades as follows Grade FeW 8OW-A FeW80-B FEW 80-C W 75%-80% 75%-80% 75%-80% C 0.1% max 0.3% max 0.6% max P 0.03% max 0.04% max 0.05% max S 0.06% max 0.07% max 0.08% max Si 0.5% max 0.7% max 0.7% max Mn 0.25% max 0.35% max 0.5% max Sn 0.06% max 0.08% max 0.1% max Cu 0.1% max 0.12% max 0.15% max As 0.06% max 0.08% max 0.10% max Bi 0.05% max 0.05% max 0.0...
-
Iron Molybdenum - Hot Selling Best Price 99.95...
Product Parameters Item name Hot Selling Best Price 99.95%min. Purity Molybdenum Crucible /Pot for Melting Purity 99.97% Mo Working temperature 1300-1400Centigrade:Mo1 2000 Centigrade:TZM 1700-1900Centigrade: MLa Delivery time 10-15 days Other Material TZM, MHC, MO-W, MO-RE, MO-LA，Mo1 Dimension & Cubage According to your needs or drawings Surface Finish turning, Grinding Density 1.Sintering molybdenum crucible Density: >9.8g/cm3; 2.Forging molybdenum crucible D...
-
Cheap PriceList for Tungsten Sintered Bar - Oe...
Product Parameters Product Name Tungsten cube/cylinder Material Pure tungsten and tungsten heavy alloy Application Ornament, decoration, Balance weight, target, Military industry, and so on Shape cube,cylinder,block,granule etc. Standard ASTM B760, GB-T 3875, ASTM B777 Processing Rolling, Forging, Sintering Surface Polish, alkali cleaning Density 18.0 g/cm3 –19.3 g/cm3 pure tungsten and W-Ni-Fe tungsten alloy cube/block: 6*6*6mm 12.7*12.7*12.7mm 20*20*20mm 38.1*38...